Clear paper jams in Tray 2 and the 550-sheet tray
Use the following procedure to check for paper in all possible jam locations related to Tray 2 and the 550-
sheet tray. When a jam occurs, the control panel displays an error message that assists in clearing the jam.
1. Remove the tray from the printer.
2. Remove the paper from the tray, and discard any
damaged paper.
3. Verify that the rear paper guide is adjusted to the
indentation for the correct paper size. If
necessary, pinch the release and move the rear
paper guide to the correct position. It should click
into place.
NOTE: When the tray is extended, the paper
size indicator changes from "A4" to "14".
80 Chapter 6 Solve problems ENWW
To Next Page
Loading...
