USB connection
This product supports a Hi-Speed USB 2.0 connection. You must use an A-to-B type USB cable that is no
longer than 2 m (6.56 ft).
CD installation
1. Insert the software installation CD into the computer CD drive.
NOTE: Do not connect the USB cable until prompted.
2. If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE
file.
3. Follow the onscreen instructions to install the software.
When you use the CD to install the software, you can choose the following types of installations:
●
Easy Install (recommended)
You will not be prompted to accept or make changes to default settings, and you automatically will
accept the software license agreement.
●
Advanced Install
You will be prompted to accept or make changes to default settings.
ENWW USB connection 25
To Next Page
Loading...