Interpret control-panel light patterns
Table 8-1 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 8-2 Control-panel light patterns
Light status State of the product Action
All lights are off.
The product is in Auto-Off mode or is turned
off.
Press the power button to deactivate the
Auto-Off mode or to turn on the product.
Status lights cycle
The status lights cycle during the formatter
initialization period or when the product is
processing a cleaning page.
No action is required. Wait for the
initialization period to end. The product
should enter the ready state when the
initialization period is finished.
Ready light is on, and attention light is
off.
The product is in the ready state. No action is required. The product is ready
to receive a print job.
72 Chapter 8 Solve problems ENWW
To Next Page
Loading...