To Next Page

To Previous Page

The above illustrations may also help you to install the alignment-bar extenders when using the edge

holders in multi-sheet printing.

NOTE: The complete set of these features will be available by the end of 2018.

9. Load the substrate between the edge holders, leaving a 10 mm (0.39 in) space between the substrate and

each edge holder.

You can now load and print as usual.

Uninstall the edge holders

1. In the Internal Print Server, tap Topmost in the Scan Beam menu. This moves the scan-axis beam and the

curing module to their highest positions.

ENWW Uninstall the edge holders 15

Questions and Answers:

Need help?

Do you have a question about the HP Latex R1000 and is the answer not in the manual?

HP Latex R1000 Specifications

General

Ink Types	HP Latex Inks
Print Technology	Latex
Print Resolution	1200 x 1200 dpi
Media Handling	Roll-to-roll
Applications	Signage, banners
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
Part Number	CZ103A (Cyan), CZ104A (Magenta), CZ105A (Yellow), CZ106A (Black), CZ107A (Light Cyan), CZ108A (Light Magenta), CZ109A (White), CZ110A (Primer)