HP LD4730 - Product features; HP Digital Signage Displays

1 Product features
HP Digital Signage Displays
The LD4730 and LD4730G digital signage displays have a wide-aspect active matrix thin-film
transistor (TFT) panel. The displays' features include the following:
● 119 cm (47 inch) diagonal screen with 1366 x 768 native resolution
●
Ultra-slim bezel for minimal visual distraction and near-seamless tiling
●
Landscape and portrait wall mounting positions
● Video inputs for VGA, Video Over Ethernet, and DisplayPort
●
Audio input jack and external speaker ports
●
Infrared remote control
●
Remote, centralized control with HP Network Sign Manager
●
External IR Sensor for group or selected control of displays in a video wall
●
Tiling for video walls
●
Color matching and calibration for all displays in a video wall
●
Mercury-free LED backlight
●
Ambient light sensor and high brightness for energy savings and good visibility in any light
●
Local dimming for enhanced contrast in dark areas of the image
●
On-Screen Display (OSD) menu in several languages for ease of setup and screen optimization
● Screen adjustment buttons (Power On/Off, OSD Controls, MENU, and INPUT) on the back of
the display
●
Management software for stand-alone displays on or off a network
●
DDC/CI interface to allow control of the display from an attached PC
●
User controls to adjust Picture, Tile Mode, Timer, Energy Saving, Aspect Ratio, Audio, and
additional setup options
●
Plug and play capability if supported by the operating system
●
Security cable provision on rear panel to lock down the display and help prevent theft
●
High-bandwidth Digital Content Protection on the DisplayPort input
●
Temperature Sensor
●
Support VESA compliant mounting interface with choice of 400 x 200 mm (15.74 x 7.87 in) and
400 x 400 mm (15.74 x 15.74 in) hole patterns
In addition, the LD4730G model features a protective glass overlay with an easy-to-clean coating.
ENWW HP Digital Signage Displays 1