Clear paper jams in the duplexer (duplex models only)
Use the following procedure to check for paper in the duplexer. When a jam occurs, the control panel displays
an animation that assists in clearing the jam.
1. At the rear of the printer, open the duplexer.
2. Remove any jammed or damaged sheets of
paper.
CAUTION: The fuser is located above the rear
door, and it is hot. Do not attempt to reach into
the area above the rear door until the fuser is
cool.
3. Close the duplexer.
ENWW Clear paper jams 121
To Next Page
Loading...