2. Install the USB flash drive into the rear USB port.
The control panel displays a The USB drive will be formatted message.
3. Select OK to complete the procedure.
NOTE: This procedure deletes all data on the USB flash drive.
Step two: Update the print driver
Update the print driver in Windows
1. Click the Start button, and then click Devices and Printers.
2. Right-click on the name of the HP printer, and then select Printer properties.
3. In the Properties dialog, select the Device Settings tab.
4. Select Update Now, and then click OK. The print driver updates.
The updated print driver will include the Job Storage tab.
Create a stored job (Windows)
Store jobs on the printer for private or delayed printing.
NOTE: The print driver might look different than what is shown here, but the steps are the same.
1. From the software program, select the Print option.
ENWW Store print jobs on the product to print later or print privately 43
To Next Page
Loading...