Change the product connection type (Windows)
If you are already using the product and you wish to change the way it is connected, use the Reconfigure
your HP Device shortcut on your computer desktop or the Programs group (depending on the operating
system) to change the connection. For example, you can reconfigure the product to use a different wireless
address, to connect to a wired or wireless network, or change from a network connection to a USB
connection. You can change the configuration without inserting the product CD. After you select the type of
connection you wish to make, the program goes directly to the portion of the product setup procedure that
needs to change.
ENWW Change the product connection type (Windows) 81
To Next Page
Loading...