Menu item Sub-menu item Sub-menu item Values Description
Use the following list to Identify the
components that can be tested.
●
lower lamp
●
sensors
●
ADF empty
●
register/deskew
●
top-of-page
●
ADF jam cover
●
ADF width
●
ADF length
●
flatbed cover
●
flatbed width
●
flatbed length
●
ADF input motor
●
ADF input reverse
●
flatbed motor
●
ADF read motor
●
ADF read motor reverse
●
ADF duplex solenoid
●
ADF LED indicator
Control Panel LEDs Use this feature to make sure the
components of the control panel are
functioning correctly.
Display
Buttons
Touchscreen
Table 3-18 Print/stop test time values (simplex print jobs)
Time value
1
First page stop Second page stop Third page stop
0 ms Leading edge at TOP sensor
(SR5)
NOTE Opening the
print-cartridge door pulls
the sheet backward.
NA NA
1 ms Leading edge about 20 mm
(0.78 inch) past the TOP sensor
(SR5)
NA NA
Table 3-17 Troubleshooting menu (continued)
ENWW Use the Administration menu 73
To Next Page
Loading...