Optic assembly
CAUTION Do not touch the lens, mirrors, or lamp when handling the optic assembly.
1. Remove the following components or assemblies:
●
ADF. See
ADF assembly on page 204.
●
Scanner. See
Scanner assembly on page 232.
●
Scanner glass assembly and top cover. See
Glass assembly and top cover on page 235.
2. Rotate the scanner right cover away from the scanner to remove it.
Figure 5-96 Remove the scanner optic assembly (1 of 13)
3. Disconnect one FFC (callout 1).
1
Figure 5-97 Remove the scanner optic assembly (2 of 13)
240 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...