3. Remove two screws (callout 3).
3
Figure 5-154 Remove the stapler paper feed assembly (2 of 3)
4. Pull the paper feed assembly straight out and away from the stapler to remove it.
Figure 5-155 Remove the stapler paper feed assembly (3 of 3)
Alignment and jogger guide assembly
1. Remove the following components or assemblies:
●
Optional: ADF. See
ADF assembly on page 204.
●
Optional: scanner. See
Scanner assembly on page 232.
●
Stapler rear cover. See
Rear cover on page 258.
●
Stapler left door. See
Left door on page 259.
276 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...