7. Carefully move the alignment and jogger guide assembly toward the back of the device and then
to the right to remove it.
CAUTION The alignment and jogger guide assembly contains fragile components (for
example, the flaps and the jogger guides). Be very careful about where and how you grasp
the assembly. Remove the assembly slowly so that you do not damage it.
Tip It might be helpful to look at Figure 5-162 Install the stapler alignment and jogger guide
assembly (1 of 5) on page 280 to see the jogger and guide assembly mounting slot in the
stapler chassis.
1
2
Figure 5-161 Remove the stapler alignment and jogger guide assembly (6 of 6)
Install the alignment and jogger guide assembly
1. Before you begin, look at the stapler chassis and locate the slotted opening in the stapler chassis.
Figure 5-162 Install the stapler alignment and jogger guide assembly (1 of 5)
280 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...