20 HP Media Center PC Getting Started Guide
Wall to cable TV set-top box or satellite box to VCR and TV using S-video cable or
composite video cable between the box and the VCR or TV
1 Do not detach any cables from your existing
setup.
2 Connect an additional cable:
■ Using S-video cable (not included):
Connect an additional S-video cable to a
second output on the set-top box or satellite
box. Plug the other end of the cable into
the S-video In connector on the back of
the PC.
Or
■ Using composite video cable: Connect an
additional composite video cable to a
second output on the set-top box or satellite
box. Connect the other end of the cable to
the S-video to composite video adapter
cable; connect the adapter to the S-video In
connector on the back of the PC.
3 When using a composite video or S-video
cable, you must also plug audio cables (not
provided) from your satellite or set-top box
into the Audio In right (red) and Audio In left
(white) connectors on the back of the PC.
4 Be sure to connect the remote sensor control
cable and position it on your set-top box or
satellite box. This allows the PC to change the
channel on the box. See “Connecting the
Remote Sensor” on page 16.
To Next Page
Loading...
Need help?
General