EasyManuals Logo

HP Media Center m7000 Getting Started Guide

HP Media Center m7000
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Configuring Speaker and Sound Options 47
Configuring Audio Output with Sound Effect Manager
Follow these steps after you have installed and
connected your speakers, if your PC model has
6 connectors.
To configure multichannel audio output for PCs with
Sound Effect Manager:
1 Click Start on the taskbar.
2 Click Control Panel.
3 Click Sounds, Speech and Audio
Devices (or Sounds and Audio Devices).
4 Click Sound Effect Manager. The window
opens.
5 Click a button near the top of the window to
see that control screen.
The Sound Effect Manager control screens
Sound Effect — selects the Environment and
the Equalizer settings. You can select an
Environment such as Under Water or
Auditorium. To use the Equalizer, click the
Power button in the center of the circular
equalizer control to turn on the Equalizer. You
can click a preset button, such as Pop or Live,
or manually adjust the settings and then save
them for easy selection later.
Speaker Configuration selects the
number of speakers, shows the Connection
Guide, and had the Speaker Test button to test
the speakers. A connector with no descriptive
text in the Connector Guide indicates that the
connector is not used for the selected speaker
configuration.
Digital Audio — selects the digital audio
output and digital audio frequency for the
digital audio connectors on the PC.
Audio Wizard — opens a window that
shows the connector panel on the front of the
PC. To close the window without enabling the
wizard, click OK.
To enable the Audio Wizard:
Make sure the Enable auto detection check box is
selected to enable the wizard. Click OK to close the
window.
Using the Audio Wizard in the Sound Effect Manager (6 connector)
The Sound Effect Manager Audio Wizard can help
you connect front-panel audio.
To use the Audio Wizard:
1 Turn on the PC.
2 Click Start on the taskbar.
3 Choose Control Panel.
4 Click Sounds, Speech and Audio
Devices (or Sounds and Audio Devices).
n
If you do not see the
device for your
configuration, change
the speaker selection
in the Speaker
Configuration
window.

Table of Contents

Other manuals for HP Media Center m7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Media Center m7000 and is the answer not in the manual?

HP Media Center m7000 Specifications

General IconGeneral
BrandHP
ModelMedia Center m7000
CategoryDesktop
LanguageEnglish

Related product manuals