To Next Page

To Previous Page

3. Remove the interior hinge covers (2).

4. Turn the computer upside down, with the front toward you.

5. Remove the rear rubber feet, and then remove the 2 Phillips 2.5×5.0 screws (1) under the feet.

6. Remove the 4 Phillips 2.0×5.0 screws (2) that secure the top cover to the base enclosure.

7. Turn the computer right-side up, with the front toward you.

8. Open the computer as far as possible.

9. Disconnect the speaker cable (1) from the system board.

10. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect

the TouchPad cable (3) from the system board.

54 Chapter 4 Removal and replacement procedures

Download from Www.Somanuals.com. All Manuals Search And Download.

Questions and Answers:

Need help?

Do you have a question about the HP Mini 110 and is the answer not in the manual?

HP Mini 110 Specifications

General

Graphics	Intel GMA 950
Wireless	802.11b/g
RAM	1GB
Storage	160GB HDD
Display	10.1 inch
Resolution	1024 x 600
Weight	1.06 kg (2.34 lbs) with 3-cell battery
Ports	3 x USB 2.0, 1 x VGA, 1 x Headphone/Microphone combo