HP MSR 2000 Preparing For Installation

v
Reset button usage guidelines
An MSR4000 router provides the Reset button. You can use the button to reboot the system or restore the
factory settings.
1. Press the Reset button for a short time to reboot the router.
2. Press the Reset button for more than 4 seconds to reboot the router and restore the factory settings.

HP MSR 2000 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Series	MSR
Network / Transport Protocol	TCP/IP, UDP/IP
Routing Protocols	BGP, OSPF, RIP, RIP-2, IS-IS
Management	Web-based, CLI
Remote Management Protocol	SNMP
Encryption Algorithm	AES, DES, 3DES
Features	Firewall, VPN, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Power Supply	AC 100-240 V
Voltage Required	AC 120/230 V
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5 - 95% (non-condensing)
Fixed Ports	4 x 10/100/1000 Ethernet, 2 x SIC slots, 2 x DSIC slots
Ports	4 x 10/100/1000 Ethernet, 2 x SIC slots, 2 x DSIC slots