HP MSR 2000 Preparing For Installation

iv
Mounting the router on a workbench
IMPORTANT:
 Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.
 Avoid placing heavy objects on the router.
To mount the router on a workbench:
1. Make sure the workbench is clean, stable, and properly grounded.
2. Place the router on the workbench with the upside up.
Figure 5 Mounting the router on a workbench
Installing the router in a 19-inch rack
Mounting brackets
The mounting brackets vary with router models, as shown in Figure 6.
Figure 6 MSR4060 mounting brackets

HP MSR 2000 Specifications

General

Brand	HP
Model	MSR 2000
Category	Network Router
Language	English