xxx
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing....Done.
****************************************************************************
* *
* HP MSR3064 BootWare, Version 1.01 *
* *
****************************************************************************
Copyright (c) 2004-2012 Hangzhou HP Technologies Co., Ltd.
Compiled Date : Sep 25 2012
CPU ID : 0x4
Memory Type : DDR3 SDRAM
Memory Size : 2048MB
BootWare Size : 1024KB
Flash Size : 8MB
cfa0 Size : 247MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Loading the main image files...
Loading file cfa0:/msr3000-cmw710-system-a0004.bin............................
.............Done.
Loading file cfa0:/msr3000-cmw710-boot-a0004.bin...................Done.
Image file cfa0:/msr3000-cmw710-boot-a0004.bin is self-decompressing..........
......Done.
System image is starting...
Startup configuration file does not exist.
Line aux0 is available.
Press ENTER to get started.
Press Enter, and the following prompt appears:
<HP>
You can now configure the router.
Examining the router after power-on
After the router is powered on, verify that:
To Next Page
Loading...
Need help?
General
