HP MSR 2000 User Manual

vi
Figure 59 Pulling the HMIM out of the slot
Figure 60 Installing a filler panel
Replacing a MIM
W
ARNING!
You can replace a MIM when the router is powered on. However, before replacin
g
a MIM when the router
is powered on, you must execute the remove hmimslot
slotnumber command.
To replace a MIM:
1. Completely loosen the captive screws of the HMIM adapter.
2. Gently pull the MIM and the HMIM adapter out of the slot along the slide rails.

HP MSR 2000 Specifications

General

Brand	HP
Model	MSR 2000
Category	Network Router
Language	English