reference guide
use the fax features
43
to change the ECM setting from the director
1 In the Director, click Settings, click Fax Settings & Setup, and then choose
Fax Settings.
choose fax settings from the fax settings & setup menu
The Fax Settings dialog box appears.
2 Click the Paper Fax Quality tab.
3 Select Error Correction for Fax Send.
selecting error correction in the paper fax quality tab of the fax settings dialog box
Reviewer Note! NEED SCREEN CAPTURE. Awaiting new UI screen captures
showing only three tabs.
4 After you are finished, click OK.
set automatic reduction
This setting determines what your HP Officejet does if it receives a fax that is too
large for the default paper size. With this setting on (the default), the image is
reduced so that it fits on one page. With this feature off, information that doesn’t
fit on the first page is printed on a second page.
To Next Page
Loading...