HP Officejet 5600 - Control Panel Features

Label Description
8 Glass
9 Lid
10 Document feeder tray
11 Rear clean-out door
12 1-LINE and 2-EXT fax ports
13 Rear USB port
14 Power connection
Control panel features
The following diagram and related table provide a quick reference to your HP All-in-
One control panel features.
Label Name and Description
1 On: Turn the HP All-in-One on or off. The On button is lit when the HP All-in-One
is on. The light blinks while performing a job.
'When the HP All-in-One is off, a minimal amount of power is still supplied to the
device. To completely disconnect the power supply to the HP All-in-One, turn the
device off, and then unplug the power cord.
2
Speed Dial: Select a speed dial number.
3 Redial/Pause: Redial the most recently dialed number, or insert a 3-second
pause in a fax number.
4
One-touch speed dial buttons: Access the first five speed dial numbers.
5
Keypad: Enter fax numbers, values, or text.
6 Attention light: When blinking, the attention light indicates an error has occurred
that requires your attention.
Chapter 1
(continued)
4 HP Officejet 5600 All-in-One series
Overview