2. Slide the width guides inward until they stop at the left and right edges of the media.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the printer.
Load paper
This section provides instructions for loading media into the printer, and contains the
following topics:
•
Load standard-size paper
•
Load envelopes
•
Load cards and photo paper
•
Load custom-size paper
Load standard-size paper
Use these instructions to load standard paper.
1. Pull out Tray 1.
2. Insert the media print-side down in the center of the tray. Make sure the stack of media
aligns with the line on the width guide, and is not higher than the paper stack line on
the guide.
NOTE: Do not load paper while the printer is printing.
Chapter 1
22 Get started
To Next Page
Loading...