HP OMEN X 27 - Page 14

12
3
1. Remove 1 tape from RC
2. Remove 2 tapes from
Ctrl cable and Audio
cable
3. Unlock 1 screw
4. Disassemble Audio BD
from RC
5. Remove audio cable
from Audio BD
6. Remove Ctrl cable from
RC
7. Unlock 3 screws
8. Disassemble Ctrl BD to
RC
9. Remove Ctrl cable to
Ctrl BD
Screw-
driver
0.9～
1.1KG
4
1. Remove 3 tapes from
lamp wire
2. Remove lamp wire from
panel and DRV BD
3. Remove 3 conduct
tapes from SHD
5
1. Unlock 4 screws
2. Disassemble hinge from
SHD
3. Remove LED cable from
panel
4. Disassemble LED BD
from mid-frame
5. Remove LED cable from
panel and LED BD
Screw-
driver
8～
10KG