Speakers
Description Spare part number
Speaker Kit (includes cable) 650484-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41), and then remove the following components:
a. WLAN module (see
WLAN module on page 44)
b. WWAN module (see
WWAN module on page 47)
c. Optical drive (see
Optical drive on page 52)
d. Hard drive (see
Hard drive on page 55)
e. Keyboard (see
Keyboard on page 57)
f. Top cover (see
Top cover on page 60)
g. System board (see
System board on page 76)
Remove the speakers:
1. Release the speaker cable (1) from the clips built into the base enclosure.
90 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
