2.
Remove the speakers (2).
Reverse this procedure to install the speakers.
Display assembly
Description Spare part number
14.0-in, high definition (HD), light-emitting diode (LED), BrightView SVA display assembly (includes microphone and wireless
antenna transceivers and cables):
In espresso black finish 650463-001
In Pacific blue finish 650465-001
In ruby red finish 650467-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41), and then remove the following components:
a.
WLAN module (see
WLAN module on page 44)
b. WWAN module (see
WWAN module on page 47)
Component replacement procedures
91
To Next Page
Loading...
