To Next Page

To Previous Page

Switch cover

Description Spare part number

Switch cover (includes LED board and cable) 446512-001

Before removing the switch cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 41).

Remove the switch cover:

Remove the three Phillips PM2.5×5.0 screws that secure the switch cover to the computer.

2. Turn the computer display-side up, with the front toward you.

3. Open the computer as far as possible.

56 Chapter 4 Removal and replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP Pavilion dv6500 and is the answer not in the manual?

HP Pavilion dv6500 Specifications

General