To Next Page

To Previous Page

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

assembly (1) and (2), the processor (3), and the system board component (4) each time the fan/heat

sink assembly is removed. Thermal material must be installed on all surfaces before the fan/heat sink

assembly is reinstalled. Thermal material is included with all fan/heat sink assembly, system board, and

processor spare part kits.

Reverse this procedure to install the fan/heat sink assembly.

Processor

NOTE: All processor spare part kits include thermal paste.

Description Spare part number

Intel Core 2 Duo processors:

2.20-GHz processor (4-MB L2 cache, 800-MHz FSB)

453771-001

2.00-GHz processor (2-MB L2 cache, 800-MHz FSB) 455515-001

1.86-GHz processor (1-MB L2 cache, 533-MHz FSB) 453773-001

1.50-GHz processor (2-MB L2 cache, 667-MHz FSB) 453772-001

Intel Core Duo processors:

T7300 2.00-GHz processor (2-MB L2 cache)

446478-001

T7100 1.80-GHz processor (2-MB L2 cache) 446479-001

T5250 1.50-GHz processor (2-MB L2 cache) 453033-001

Processor bracket 450370-001

Before removing the processor, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

Component replacement procedures 83

Questions and Answers:

Need help?

Do you have a question about the HP Pavilion dv6500 and is the answer not in the manual?

HP Pavilion dv6500 Specifications

General