Display assembly
NOTE: The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables.
Description Spare part number
35.6 cm (14.0 in), HD, LED, SVA BrightView display assembly
Supports HD and VGA:
●
Bright purple (modern mesh pattern) 683844-001
●
Ruby red (modern mesh pattern) 683845-001
●
Sparkling black 683847-001
●
Linen white (butterfly blossom pattern) 689462-001
Supports HD Only:
●
Linen white (modern mesh pattern) 707892-001
●
Bright purple (modern mesh pattern) 707888-001
●
Ruby red (modern mesh pattern) 707889-001
●
Winter blue (modern mesh pattern) 707890-001
●
Sparkling black 707891-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 38).
5. Remove the service door (see
Service door on page 39).
6. Remove the optical drive (see
Optical drive on page 40).
7. Remove the hard drive (see
Hard drive on page 43).
8. Remove the keyboard (see
Keyboard on page 50).
9. Remove the top cover (see
Top cover on page 53).
Remove the display assembly:
1.
Disconnect the display panel cable (1) from the system board.
ENWW
Component replacement procedures
63
To Next Page
Loading...
