HP PAVILION MX75 - Displaying Monitor Status Information; Resetting Monitor to Factory Defaults

20
HP Pavilion MX75 Monitor Guide
Filename: M0075KEU2.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: James Zimmerman Last Saved By: WASSER, Inc.
Revision #: 35 Page: 20 of 32 Printed: 10/13/00 11:23 AM
Using the Status Window
The Status window is an information window
that displays the horizontal and vertical scan
frequencies, the resolution (for pre-set modes
only), and the serial number of the monitor.
To display the Status window:
1
In the OSD Advanced Menu
window, press the Plus (+) or Minus
(–) button to move to the Status icon.
2
Press the Select button to open the Status
window.
3
Press Select to close the Status window.
EXIT
SERIAL NUMBER
AASDD12345
FV :70Hz
FH :31KHz
RESOLUTION:
640 X 480
STATUS
EXIT
Restoring Factory Adjustments
To restore all parameters to the original factory
values:
1
Turn the power off.
2
While pressing the Plus (+) button, turn the
power back on.
I