HP Pavilion MX75 Monitor Guide
3
Filename: M0075KEU2.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: James Zimmerman Last Saved By: WASSER, Inc.
Revision #: 35 Page: 3 of 32 Printed: 10/13/00 11:23 AM
English
Additional Safety Information
This product has been evaluated for connection
to an “IT” power system (an AC distribution
system with no direct connection to earth,
according to IEC950).
AC Power Safety Warning
Warning:
Locate the monitor near an
AC outlet. The AC power cord is your HP
monitor’s main AC disconnecting device
and must be easily accessible at all times.
For your safety, the power cord provided
with your system has a grounded plug.
Always use the power cord with a
properly grounded wall outlet to avoid
the risk of electrical shock.
Installation
Follow the instructions in this chapter to install
your HP Pavilion MX75 Multimedia Monitor.
Warning:
The MX monitor is a heavy
object. Exercise caution, or get help when
lifting it, to prevent back injury.
Note:
Before installing the monitor, refer to your PC and
video adapter documentation. You may need to
make changes to accommodate the monitor.
Locating the Monitor
Place the monitor on a flat, sturdy surface.
Choose an area that is free from excessive heat,
moisture, and sunlight. Locate the monitor as far
as possible from sources of electromagnetic
interference, such as transformers, motors,
fluorescent lighting, and other PC monitors.
To Next Page
Loading...
Need help?
General