18. Use the following images to install the display panel:
a. Install the tape on both sides of the display back cover (1).
b. Pull the backing o the top of the tape (2).
c. Insert the panel into the display back cover (1), and then press it downward into place (2).
d. Use a tool to make sure the display cable and antennas/webcam cable are routed correctly through
the hinge caps on the inside of the hinges (3).
Reverse this procedure to reassemble install the display assembly.
66 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
Need help?
General
