Power connector
Table 5-16 Power connector description and part number
Description Spare part number
Power connector L51098-001
Before removing the power connector, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 30).
2. Remove the bottom cover (see Bottom cover and Rubber Foot Kit on page 31).
3. Remove the battery (see Battery on page 34).
4. Remove the display (see Display assembly on page 59).
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the power connector and cable from the computer (2).
Reverse this procedure to install the power connector cable.
Component replacement procedures 67
To Next Page
Loading...
Need help?
General
