HP Pro 3000 SFF - Routine Care

Floppy Diskette A: Allows you to set drive A to:
●
Disabled
●
1.44 MB 3.5”
● Not Installed
1st Drive
2nd Drive
3rd Drive
4th Drive
For each, allows you to:
●
(view only)
◦
Capacity (Size - HDD only)
◦ Transfer Mode
● Smart Support - run HDD self-test for selected channel:
◦
SMART Status Check
◦
SMART Short Self-Test
◦ SMART Extended Self-Test
System Information (view only)
●
Installed Memory
●
Memory Bank 1
● Memory Bank 2
● Memory Bank 3
●
Memory Bank 4
●
BIOS Revision
● Core Version
●
Product Number
●
Model Number (press Enter to change)
●
Serial Number (press Enter to change)
●
Asset Tag (press Enter to change)
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 3-10 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM (view only)
Table 3-9 Computer Setup—Main (continued)
HP Pro 3010 – Computer Setup (F10) Utility 21