11. If it is necessary to replace the display bezel or any of the non-TouchScreen display assembly
subcomponents:
a. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display back cover.
b. Remove the display bezel (4).
The display bezel is available using spare part number 809855-001.
12. If it is necessary to replace the webcam/microphone module:
a. Remove the display bezel.
b. Disconnect the display LED board cable (1) from the webcam/microphone module.
Component replacement procedures 39
To Next Page
Loading...
