c. Detach the webcam/microphone module (2) from the display back cover. (The webcam/
microphone module is attached to the display back cover with double-sided adhesive.)
d. Remove the webcam/microphone module.
The webcam/microphone module is available using spare part number 809875-001.
13. If it is necessary to replace the display panel:
a. Remove the display bezel.
b. Remove the four Phillips PM2.0×2.0 screws (1) that secure the display panel to the
display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
