EasyManua.ls Logo

HP ProBook 440 G2

HP ProBook 440 G2
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display assembly
Description Spare part number
Display panel assembly, touch screen 782118-001
Display panel assembly, touch screen, two antennas 782531-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 42).
5. Remove the following components:
a. Service doors (see
Service door on page 43).
b. Hard drive (see
Hard drive on page 45)
c. Optical drive (see
Optical drive on page 49)
d. WLAN module (see
WLAN/Bluetooth combo card on page 51)
e. WWAN module (see
WWAN module on page 53)
f. Keyboard (see
Keyboard on page 55)
g. Top cover (see
Top cover on page 58)
Remove the display assembly:
1. Position the computer upside down.
Component replacement procedures 89

Table of Contents

Related product manuals