HP ProBook 455 G3 User Manual

4 Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care
when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
26 Chapter 4 Removal and replacement procedures preliminary requirements

HP ProBook 455 G3 Specifications

General

Processor	AMD A10-8700P
Display	15.6-inch diagonal HD SVA anti-glare LED-backlit (1366 x 768)
RAM	Up to 16GB DDR3L
Storage	500GB, 1TB HDD or 128GB, 256GB SSD
Graphics	AMD Radeon R6
Operating System	Windows 10 Pro
Battery	Li-ion
Ports	2 USB 3.0, 2 USB 2.0, 1 HDMI, 1 RJ-45, 1 VGA, 1 headphone/microphone combo
Wireless	802.11a/b/g/n/ac, Bluetooth 4.2