Bottom
Component Description
(1) Vent Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(2)
Service door Provides access to the hard drive bay and the memory
module slots.
(3)
Battery release latches (2) Releases the battery.
(4) Service door Provides access to the wireless LAN (WLAN) module slot.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore
computer functionality, and then contact support through
HP Support Assistant. To access HP Support Assistant in
Windows 8, from the Start screen, select the HP Support
Assistant app. To access Help and Support in Windows 7,
select Start > Help and Support.
(5) Battery bay Holds the battery.
10 Chapter 2 External component identification
To Next Page
Loading...
