Table 10-1 Computer specications (continued)
Metric U.S.
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of
temperatures.
33.8 cm (13.3 in) display specications
This section provides specications for your display.
Table 10-2 Display specications
Metric U.S.
Active diagonal size 33.8 cm 13.3 in
Resolution 1920 × 1080
Surface treatment Antiglare
Brightness 250 nits (45% CG panels)
400 nits (sRGB 100% panels)
1000 nits (72% CG panels)
Viewing angle UWVA
Backlight LED
Display panel interface eDP
Solid-state drive specications
This section provides specications for your solid-state drives.
Table 10-3
Solid-state drive specications
256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s
Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s
92 Chapter 10 Specications