3. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
When installing the solid-state drive cover, be sure that the edges of the cover t into the clips next to the
solid-state drive module.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table
5-5 Memory module descriptions and part numbers
Description Spare part number
16 GB, DDR4-3200 L67710-002
34 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
