Table 5-7 RTC battery description and part number
Description Spare part number
RTC battery L13694-001
Before removing the RTC battery, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (Bottom cover on page 29).
3. Remove the battery (see Battery on page 30).
Remove the RTC battery:
1. Disconnect the RTC battery cable from the system board (1), and then remove the cable from the clip
(2).
2. Remove the RTC battery from the computer (3).
Reverse this procedure to install the RTC battery.
Rear camera module and board
To remove the rear camera and board, use this procedure and illustration.
Table
5-8 Rear camera and board description and part number
Description Spare part number
Rear camera and camera board
NOTE: The camera cable is included in the Cable Kit, spare part number M03431-001. The camera bracket
is included in the Bracket Kit, spare part number M03436-001. The camera thermal shield is included in the
Plastics Kit, spare part number M03437-001.
M03443-001
Before removing the rear camera and camera board, follow these steps:
Component replacement procedures 39