HP ProCurve 5308xl User Manual

Router Redundancy Using XRRP
Messages Related to XRRP Operation
Message Meaning
Failed to alloc a pkt buf for an XRRP
pkt from < routine-name >
Pkt rcvd that was too short, len =
< packet-len >, min = < min-length-allowed >
Pkt rcvd with a checksum error from
rtr < router-num >
Pkt rcvd with an illegal domain
number of < domain-num >
Pkt rcvd with an illegal rtr number
of < router-num > in domain
< domain-num >.
Pkt rcvd with dup number of
< router-num > in domain < domain-num >
Rcvd its own pkt back (network loop)
on rtr < router-num >
Rcvd pkt with version number
< version-num > expected < version-num >
Rcvd a pkt from rtr < router-num >, owner
< router-num >, vid < vid-num >, no such VR
Rcvd a pkt from rtr < router-num >, with
unknown pkt type < packet-type >
Rcvd a pkt from rtr < router-num >, with
ver/type = < version-num >, expected
< version-num >
Indicates that XRRP was not able to allocate a packet
for transmission. This indicates that the system is
critically low on resources.
Indicates that XRRP received an XRRP packet that
was too short. This event increments the global
corrupt packet counter.
Indicates that XRRP received an XRRP packet that
contained a checksum error
Indicates that XRRP received an XRRP packet that
contained an illegal domain number (domain must be
between 1 and 16).
This indicates that XRRP received an XRRP packet
that contained an illegal router number (router must
be between 1 and 2)
Indicates that XRRP received an XRRP packet that
contained a the local routers router number. (This
indicates router miss-configuration.)
Indicates that XRRP received a packet sent out by this
router (network loop problem).
Indicates that XRRP received a packet with the wrong
XRRP version number.
Indicates that XRRP received a packet that doesn't
reference any virual routers on this router. This error
also occurs if the VID received is not configured on
this router which would also not have the virtual
router configured. This error will not force the remote
miss-configuration flag. Fail-over can still occur from
the router where the VR is not configured to the router
that has the VR configured so long as a duplicate IP
address doesn't exist.(This indicates a configuration
error.)
Indicates that XRRP received a packet with an
unknown XRRP packet type.
Indicates that XRRP received a packet with an
unknown VRRP version or type number in the VRRP
portion of the packet.
12-23

HP ProCurve 5308xl Specifications

General

Brand	HP
Model	ProCurve 5308xl
Category	Switch
Language	English