Rear panel components
Refer to the following images and tables for the rear components on vPro and non-vPro systems.
vPro systems
Table 1-2 Rear panel components and their descriptions on a vPro computer system
(1) Audio-out jack for power audio devices (6) Audio-in jack
(2) Dual-Mode DisplayPort™ 1.2 (DP++) connectors (2) (7) RJ-45 (network) jack
(3) Congurable I/O port (choice of DisplayPort 1.2,
HDMI 2.0, VGA, USB Type-C with DisplayPort™
output)
(8) Serial port (select products only)
(4) USB 2.0 ports (2) (9) Power cord connector
(5) USB 2.0 ports (2)
NOTE: If using a USB keyboard, HP recommends connecting the keyboard to one of the USB ports with the Wake from S4/S5 feature.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the integrated
graphics on the system board may be used. The specic graphics card installed and software conguration will determine the behavior.
The system board graphics can be disabled by changing settings in Computer Setup.
Rear panel components 3
To Next Page
Loading...
