7. Enable the FC ports.
In this example, FC ports 2/1 through 2/8 are enabled.
Nexus5010(config)# interface fc 2/1-8
Nexus5010(config-if)# no shutdown
Nexus5010(config-if)# exit
Nexus5010(config)# exit
8. Copy the running configuration to the startup configuration location.
Nexus5010# copy running-config startup-config
[########################################] 100%
9. Copy the running configuration to a backup location.
Nexus5010# copy running-config ftp://10.10.20.1/backup.txt
10. Verify the configuration.
Nexus5010# show interface brief
Nexus5010# show running-config
HP StorageWorks Fibre Channel Over Ethernet Application Note 31
To Next Page
Loading...
Need help?
General