3 PIC PROG connector
4 HDD 13 connector
5 Power connector
6 HDD 14 connector
7 HDD LED connector
1. Install the PCI expansion board into the PCI cage.
a. Align the PCI expansion board with the open expansion slot.
b. Press the PCI expansion board into the expansion slot on the riser card.
c. Tighten the screw that secures the expansion board to the PCI cage.
2. Align the PCI cage assembly to the system board expansion slot, and then press it down to
ensure full connection to the system board.
3. Tighten the thumbscrews to secure the PCI cage assembly to the system board and secure the
screw on the rear panel of the chassis.
Figure 65 Reinstalling the PCI Cage with PCI Expansion Board
4. Connect the necessary cable(s) to the system board.
To Next Page
Loading...
