Removal and replacement procedures 96
To install the HDD PCI cage:
1. Loosen the thumbscrew and screws that secure the HDD PCI cage to the system board.
2. Lift the HDD PCI cage assembly away from the system board.
Figure 66 Removing the HDD PCI Cage Assembly
3. Align the four backplane holes to the corresponding standoffs on the HDD PCI cage, and then
push the card down.
4. Tighten the screw that secures the backplane to the HDD PCI cage.
Figure 67 Installing the 2HDD Backplane
To Next Page
Loading...
