HP ProLiant DL360 G7 - Access the HP Systems Insight Display

No. Task Reference Avaya
recommendation
not fall out of its
compartment in the
baffle.
To remove the cable
from the battery, gently
rock the connector back
and forth and free of the
alignment slots.
Caution:
When replacing the
air baffle and facing
the front of the server,
insert the left side into
the alignment slots,
then gently flex the
baffle so that the right
side slides into its
alignment slot easily.
DO NOT attempt to
force or pound the
baffle into place.
Caution:
DO NOT pinch the
battery cable when
replacing the air
baffle.
7
Replace the cover MSG: Removal and
replacement procedures >
Access panel
8 Slide the server into
the rack
RI-SR Check that the Cable
Management Arm (if
present) moves freely
out of the way of rear
panel components.
9 Connect and secure
the power cords
GS: Connecting the Power
Cables
GS: Securing the Power
Cord
10 Power up the server GS: Turning on the
System
Maintaining and Troubleshooting the HP DL360 G7 Server
20 Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server November 2010