HP ProLiant DL360 G7 - Front Panel LEDs and Buttons

No. Description
9 Hard disk drive LEDs
10 Hard disk drive LEDs
Note:
In addition to the indicators listed above see also UG: Front panel LEDs and buttons.
Rear-panel troubleshooting indicators
No. Description
1 Slot 1 PCIe2 x8 (8, 4, 2, 1)
Note:
A half HT faceplate is required, and you might
need to remove the full faceplate and replace it
with a half faceplate (requires a Phillips
screwdriver). If adding a NIC, PCI Slot 1 must
be used prior to slot 2 (applies to NICs only).
2 Slot 2 PCIe2 x16 (16, 8, 4, 2, 1), 75W +EXT 75W*
3 Power supply LEDs
4 Optional power supply LEDs
5 iLO 3 connector
6 Serial connector
7 Video connector
8 NIC LEDs
9 NIC LEDs
10 NIC LEDs
11 NIC LEDs
12 USB connectors (2)
Maintaining and Troubleshooting the HP DL360 G7 Server
8 Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server November 2010
Comments on this document? infodev@avaya.com