HP ProLiant DL360p G8 - Altitude and Air Pressure Requirements; Hardware Dimensions and Clearance; Temperature and Humidity Requirements

Base unit Baseline Options
Additional items 2 front USB, 4 back USB, 1 internal USB
port, and front video connector
Altitude and air pressure requirements
A table listing the altitude and air pressure requirements for the HP ProLiant DL360p G8 server.
Altitude
Operating 3048 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change rate
is 457 m/min (1500 ft/min).
Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Hardware dimensions and clearance requirements
Table of dimensions and clearance requirements for the HP DL360p G8 server
Type
Description
Dimensions
Height: 4.32 cm (1.70 in)
Width: 43.47 cm (17.11 in)
Depth: 69.85 cm (27.50 in)
Weight (maximum; two
processors, two power
supplies, eight hard disk
drives)
19.2 kg (42.33 lb)
Temperature and humidity requirements
This is a table of the temperature and humidity requirements for the HP ProLiant DL360p G8 server.
Installing the HP DL360p G8 Server
10 Installing the HP ProLiant DL360p G8 Server September 2013
Comments on this document? infodev@avaya.com