HP ProLiant DL380 Generation9

QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Pre-configured Models
Page 16
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options
purchased will be shipped separately.
3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need
additional hard drive blanks, they can order more using P/N 666986-B21: HPE LFF Hard Drive Blank Kit.
NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is
also included with each standard AC power supply option kit. If a different power cord is required, please check the
ProLiant
Power Cables web page.
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
Entry Models
[SKU Number]
766342-B21
752686-B21
826681-B21
Model Name
HP ProLiant DL380 Gen9 E5-
2609v3 1P 8GB-R B140i 4LFF
SATA 500W PS Entry Server
HP ProLiant DL380 Gen9 E5-
2609v3 1P 8GB-R B140i 8SFF
SATA 500W PS Entry Server
HPE ProLiant DL380 Gen9 E5-
2609v4 1P 8GB-R B140i 8SFF
500W PS Entry SATA Server
Processor
Intel® Xeon® E5-2609v3
Intel® Xeon® E5-2609v4
Number of
Processors
One
Memory
8GB (1x8GB Registered DIMMs,
2133 MHz)
NOTE: With the E5-2609v3 this
memory DIMM will only operate at
1600MHz.
8GB (1x8GB Registered DIMMs, 2400 MHz)
NOTE: With the E5-2609v4 this memory DIMM will only operate at
1866MHz.
Network
Controller
HPE Embedded 1Gb Ethernet 4-port 331i Adapter, plus optional HPE Flexible LOM or stand up card
Storage
Controller
HPE Dynamic Smart Array B140i, plus optional HPE Flexible Smart Array or Smart HBA controller
NOTE: Default is AHCI off chipset, Smart Array needs to be enabled on SATA model.
Hard Drive
None ship standard
Internal
Storage
4 LFF HDD Bays
8 SFF HDD Bays (upgradable to 24)
Optical Drive
Bay
Not Available
Optional Universal Media Bay (724865-B21)
Optical Drive
Optional via HPE Mobile USB
DVDRW Drive (701498-B21)
Optional DVD-ROM (726536-B21) or DVD-RW (726537-B21) via the
Universal Media Bay (724865-B21)
PCI-Express
Slots
3 PCIe slots (+3 PCI slots available with upgrade option, second processor required)
Power Supply
(1) HPE 500W Flex Slot Platinum Power Supply
Fans
4 hot plug fans, redundant
Management
iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced (optional), Insight Control
(optional), HPE OneView (optional)
Form Factor
Rack (2U), HPE Easy Install Rails